Toggle menu
Toggle preferences menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.
Skyworth W1
Basic Info
VR/AR Virtual Reality
Type Head-mounted display
Subtype Mobile VR
Manufacturer Skyworth
Release Date 2020
Requires Smartphone connected over USB Type-C (DisplayPort 1.4 signal input)
Display
Display 2 x LCD binocular (2.1-inch Fast LCD, 1600 x 1600 each)
Resolution 1600x1600 per-eye
Refresh Rate 72 Hz
Image
Field of View 94° diagonal
Optics
Optics Double lens short focal module
Ocularity Binocular
IPD Range 56-70 mm hardware adjustable (manual)
Adjustable Diopter 0-800 degree diopter adjustment, independent for each eye
Audio
Audio Stereo speaker and 3.5 mm jack
Connectivity
Ports USB Type-C
Power Supplied by the phone (5V/1A)
Device
Dimensions 153 mm x 58 mm x 43 mm
Weight 150 g (excluding cable and mask)
Color White & Black
Sensors IMU (3 axis load force sensing + 3 axis gyroscope), infrared proximity sensor
Input Confirm and Return buttons; optional VR controller


Skyworth W1 is a virtual reality head-mounted display released in 2020. It is a tethered headset made by Skyworth for use with a smartphone. Skyworth VR's English-language website listed it as "Tethered W1 (for Phone)", next to the PC version, the Skyworth W1 Pro, which was listed as "Tethered W1 Pro (for PC)".[1]

The W1 has two 2.1-inch 1600 x 1600 fast-response LCD panels, a 94 degree field of view and a short-focus double-lens optical module. Skyworth's specification table gives its weight as 150 g, excluding the cable and face mask.[1] It depends on the connected phone: according to Skyworth, the phone streams the content and powers the glasses through the same cable.[1]

The W1 was made by Skyworth VR, the virtual reality business of the Chinese electronics group Skyworth. Skyworth VR says the group began deploying VR and AR technology in 2015 and that the VR team became an independent subsidiary in 2017.[2]

Reviewed 27 September 2026. Checked every specification, the phone connection and power details and the W1 Pro comparison against Skyworth VR's archived W1 product page, and the 2015/2017 company history against its archived news feed (30 June 2022 Wayback copies); release year and 72 Hz refresh rate are carried over unverified. About review dates.

Design and hardware

Display and optics

Each eye has its own 2.1-inch LCD panel with a resolution of 1600 x 1600 pixels, for a combined resolution of 3200 x 1600. Skyworth lists the pixel density as 1078 PPI and markets the display as an "IMAX Giant Screen with 3.2K Resolution". The company says the fast LCD screens have low latency.[1]

The optics are listed as a "Double lens short focal module", and Skyworth credits this ultra-short-focus optical module for the headset's light body. The field of view is 94 degrees.[1]

The headset supports 0-800 degree diopter adjustment for nearsighted users. Skyworth states that each eye can be adjusted independently, so that users do not need to wear their own glasses inside the headset. The manufacturer gives 56-70 mm as the adaptive range of interpupillary distance.[1]

Connection and power

The W1 connects to a phone over USB Type-C. Skyworth's specification table lists the signal input as "USB Type-C DP1.4", that is, a DisplayPort 1.4 signal carried over the USB-C connection. The phone also supplies power to the headset at 5V/1A.[1]

Because the phone powers the glasses, Skyworth says the phone cable also has a connection for a charger or power bank, so that the phone and the headset can be powered at the same time during use.[1]

Sensors, audio and controls

The headset contains an IMU, which Skyworth describes as "3 axis load force sensing + 3 axis gyroscope". It also has an infrared proximity sensor with a detection distance of about 5 cm.[1]

Audio comes from a built-in stereo speaker, which Skyworth markets as spatial audio, and a 3.5 mm jack for external earphones. The headset has two buttons, Confirm and Return, and Skyworth lists its color as "White & Black".[1] An optional VR controller, designed for one-handed use, can be used as a remote control for navigation or as a gamepad with a trigger.[1]

The specification table marks the W1, but not the W1 Pro, as supporting "VR BOX". Skyworth's page does not explain what this support covers.[1]

Software

On the shared W1 and W1 Pro product page, Skyworth advertised compatibility with more than 500 VR apps and named SteamVR, Viveport, YouTube and Netflix as examples. The page also says users can install their own apps.[1]

Specifications

Specification Skyworth W1
Display Two 2.1-inch 1600 x 1600 fast-response LCD screens[1]
Resolution 1600x1600 per-eye (3200 x 1600 combined)[1]
Pixel density 1078 PPI[1]
Refresh rate 72 Hz
Field of view 94°[1]
Optics Double lens short focal module[1]
Diopter adjustment 0-800 degrees[1]
IPD range 56-70 mm[1]
Input interface USB Type-C[1]
Signal input USB Type-C DP1.4[1]
Power From the phone, 5V/1A[1]
Audio Stereo speaker + 3.5 mm jack[1]
Sensors IMU (3 axis load force sensing + 3 axis gyroscope); infrared proximity sensor[1]
Buttons Confirm and Return[1]
Weight 150 g (excluding cable and mask)[1]
Size 153 mm x 58 mm x 43 mm[1]
Color White & Black[1]

Comparison with the W1 Pro

Skyworth presented the W1 and the Skyworth W1 Pro on one product page. The two share the same display, lenses, field of view, diopter and IPD ranges, sensors, audio and buttons. They differ in the device they connect to, the input interface and video signal, weight, size and "VR BOX" support.[1] The page's marketing text gives a weight of 130 g for the product line, while its specification table lists 150 g for the W1 and 130 g for the W1 Pro.[1]

Specification Skyworth W1 Skyworth W1 Pro
Host device Phone PC
Input interface USB Type-C USB 2.01+USB POWER1+HDMI2.0*1 (as listed by Skyworth)
Signal input USB Type-C DP1.4 HDMI 2.0
Power From the phone, 5V/1A From the PC, 5V/1A
Weight (excluding cable and mask) 150 g 130 g
Size 153 mm x 58 mm x 43 mm 193 mm x 158 mm x 58 mm
VR BOX Supported N/A

Source: Skyworth VR product page.[1]

See also

References