AMBEO VR Mic: Difference between revisions
No edit summary |
|||
| Line 46: | Line 46: | ||
|Transducer Principle||Pre-polarized condenser mic | |Transducer Principle||Pre-polarized condenser mic | ||
|- | |- | ||
|Pickup Pattern|| | |Pickup Pattern||4 cardioids arranged in A format<br>FLU – Front-Left Up<br>FRD – Front-Right Down<br>BLD – Back-Left Down<br>BRU – Back-Right Up | ||
FLU – Front-Left Up | |||
FRD – Front-Right Down | |||
BLD – Back-Left Down | |||
BRU – Back-Right | |||
|- | |- | ||
|Mixing to B-Format|| | |Mixing to B-Format||W, X, Y, and Z<br>W – FLU + FRD + BLD + BRU<br>X – FLU + FRD - BLD – BRU<br>Y – FLU - FRD + BLD – BRU<br>Z – FLU - FRD - BLD + BRU | ||
W – FLU + FRD + BLD + BRU | |||
X – FLU + FRD - BLD – BRU | |||
Y – FLU - FRD + BLD – BRU | |||
Z – FLU - FRD - BLD + | |||
|- | |- | ||
|Frequency Response||20Hz to 20kHz | |Frequency Response||20Hz to 20kHz | ||
| Line 68: | Line 60: | ||
|Min. Terminating Impedance||1000 ohms | |Min. Terminating Impedance||1000 ohms | ||
|- | |- | ||
|Equivalent Noise Level|| | |Equivalent Noise Level||18 dB-A as per IEC 61672-1 <br>27 dB CCIR as per CCIR 468-3 | ||
27 dB CCIR as per CCIR 468- | |||
|- | |- | ||
|Maximum Sound Pressure Level||130 dB(A) for 1kHz | |Maximum Sound Pressure Level||130 dB(A) for 1kHz | ||
| Line 76: | Line 67: | ||
|- | |- | ||
|Mic Connector||DIN12M (use enclosed adapter cable to convert to 4x XLR3M) | |Mic Connector||DIN12M (use enclosed adapter cable to convert to 4x XLR3M) | ||
|- | |- | ||
|Operating Temperature|| | |Polarity||Pin1 (GND), Pin2 (+), Pin3 (-) | ||
14 to 131-degree | |- | ||
|Operating Temperature||-10 to 55-degree Celsius <br>14 to 131-degree Fahrenheit | |||
|- | |- | ||
|Storage Temperature||"-20 to 70-degree Celsius | |Storage Temperature||"-20 to 70-degree Celsius | ||